try using toxicks mir.exe in the releases section if that dont work then maybe the new reg server is also not working make sure you have changed the ip for the reg server in the mir200 folder setup.txt and in the dbsvc.ini
You dont need the 3in1 exe when your connecting to the reg server that has been put up. your settings are right just make sure the server address is pointing to the current reg sever thats working as the original had stopped. make sure you do the same adress in both setup.txt in mir200 folder...
if your getting connection closed and the server is running ok must be the setting in your client thats wrong check you ini's files if its not that then something must be wrong server side cant really tell without a few pics.
worked out the race img ect is related to his type of attack and there is no other mob that has his attack so short of doing every number from 0-inf i cant think of a way to find it out unless there is a way of getting his race img ect but havt found any apps for that
Been trying to get omaking to work on this new emu but cant get much more than a jumbled up sequence of what he should look like ie get an image of him sidways then it all goes blue and he change into a pillar im using these setting at the moment
Race Raceimg appr...
only a few of my commands work even though the command.txt is fully translated.
Most annoying 1's that dont work is the @move command and the @changejob
the guys 3in1 server is down at the moment check sticky on forum. thats why u cant connect. if u got a network at home run it on that use you internal ip in the dbserver folder dbsvc.ini and in the setup.txt in mir200 then run the 3in1.exe on the machine thats not running the server files hope...
check unpnp is disabled use toxicks mir.exe in releases section make sure paths are set to 127.0.0.1 on you mir client then run the exe's in the order in start folder server is running fine looking at the picys must just be the exe your using or one of your client ini's aint set right
you dont need 3in1.exe with these files just check its all set to 127.0.0.1 which i think they are anyway and then click the start folder and run them in that order make sure unpnp is disabled make sure you client files are st to 127.0.0.1 and should work fine
17:39:29] Windows socket error: Only one usage of each socket address (protocol/network address/port) is normally permitted (10048), on API 'bind'
this is what displays in gamegate window when i run the 3in1.exe 1st dunno what it means but im assuming that to port adresses ar clashing.
Re: PlumeWind(1.9 Emulator) working again
aye same thing
i changed the reg code in the setup for the m2 server so it was same as guide although mine was originaly different proberly not that but thought i would say
Re: PlumeWind(1.9 Emulator) working again
Thanks so much milo the ammount of moaning about released files on this forum is getting stupid hopefully more people will take notice of your generosity <<<excuse spelling gonna have a crack at this later thanks again
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.