- Nov 7, 2007
- 3,811
- 116
- 300
Woool 1.9 Server Files
Setup Guide:
Downloads:
SQL 2000 (Windows XP)
SQL 2008 (Windows 7)
Server Files Download (Updated 08/06/2014)
English WooolClient v1
Server Source Code
Move server files to a drive (Default is C:\, if you choose another you will need to change your paths in the server files.)
STEP 1
Installing Database [SQL 2008]
SQL Server Management Studio and login.
Right Click Databases > Restore Databases...
Select From Devices and browse to CHERODB.bak (WolServer/DB/DBBack)
Select the last restore point
In To Database, type in CHERODB.
Click OK and finish
;----------------------------------------------------------------------------------------------------------------------------
STEP 2
Setting Server
Open DBServer/Configuration.ini
Edit SQL information
[DATASETUP]
DataServer=SQL Instance
DataBase=CHERODB
DataAccount=sa
DataPassWord=Password
Do the same for the following files
Loginsrv/Logsrv.ini
Mir200/!Setup.txt
;----------------------------------------------------------------------------------------------------------------------------
STEP 3
Setting Paths
This can be done quick using the GameCenter, open Gamecenter and click Configuration tab. Engine directory by default is C:\WolServer\, so if you have your files in C:\ you do not need to set.
If you have a different path, edit Engine directory then click "Next", keep clicking next until you are prompted to save and click OK.
If you struggle to use the Gamecenter, here are the list of paths you need to change.
DBServer/dbsrc.ini
Loginsrv/Logsrv.ini
Mir200/!Setup.txt
;----------------------------------------------------------------------------------------------------------------------------
Additional Information
Setting Up Online
Following Ports need forwarding
7000
7100
7200
7300
7400
Reason for the extra ports is because we need to run 3 runagates for secure connection.
Find your IP Adress http://www.whatismyip.com
Edit the follow files
DBServer/!ServerInfo.txt
127.0.0.1 2.127.3.184 7200 2.127.3.184 7300 2.127.3.184 7400
LoginSrv/!addrtable.txt
woool Title1 127.0.0.1 2.127.3.184 2.127.3.184:7100
Mir200/!runaddr.txt
127.0.0.1
2.127.3.184
;----------------------------------------------------------------------------------------------------------------------------
CTDataView
This is a simple editing tool which allows you to edit all databases, more secure way of editing through SQL.
Setup CTDataView
Open CTDataView.iniand enter your sql details
;----------------------------------------------------------------------------------------------------------------------------
SQL Picture Guide:
Download:
Red: 32bit
Blue: 64bit
SQL 2008
Scroll down the list and download SQL Management Studio.
Installing SQL 2008 R2
Accept License Terms.
You can leave the next part default or you can give it any name you wish, it will be the name of your SQL server instance name and is used in the server files
SQLEXPRESS is default.
Select mixed mode and enter a password.
Click Next on next screen and should start installing.
Install SQL Management Studio is pretty much exactly the same process, you should see it in the features list when you get to that point, if you don't then it's something to do with other sql installations and i can't exactly remember how to solve that problem, happend to me once but can't remember how i fixed it.
Setup Guide:
Downloads:
SQL 2000 (Windows XP)
SQL 2008 (Windows 7)
Server Files Download (Updated 08/06/2014)
English WooolClient v1
Server Source Code
Move server files to a drive (Default is C:\, if you choose another you will need to change your paths in the server files.)
STEP 1
Installing Database [SQL 2008]
SQL Server Management Studio and login.
Right Click Databases > Restore Databases...
Select From Devices and browse to CHERODB.bak (WolServer/DB/DBBack)
Select the last restore point
In To Database, type in CHERODB.
Click OK and finish
;----------------------------------------------------------------------------------------------------------------------------
STEP 2
Setting Server
Open DBServer/Configuration.ini
Edit SQL information
[DATASETUP]
DataServer=SQL Instance
DataBase=CHERODB
DataAccount=sa
DataPassWord=Password
Do the same for the following files
Loginsrv/Logsrv.ini
Mir200/!Setup.txt
;----------------------------------------------------------------------------------------------------------------------------
STEP 3
Setting Paths
This can be done quick using the GameCenter, open Gamecenter and click Configuration tab. Engine directory by default is C:\WolServer\, so if you have your files in C:\ you do not need to set.
If you have a different path, edit Engine directory then click "Next", keep clicking next until you are prompted to save and click OK.
If you struggle to use the Gamecenter, here are the list of paths you need to change.
DBServer/dbsrc.ini
Code:
Dir=C:\WolServer\DBServer\FDB\
IdDir=C:\WolServer\DBServer\FDB\
HumDir=C:\WolServer\DBServer\FDB\
FeeDir=C:\WolServer\DBServer\FDB\
BackupDir=C:\WolServer\DBServer\Backup\
ConnectDir=C:\WolServer\DBServer\Connection\
LogDir=C:\WolServer\DBServer\Log\
Code:
IdDir=C:\WolServer\LoginSrv\IDDB\
WebLogDir=C:\WolServer\LoginSrv\GameWFolder\
CountLogDir=C:\WolServer\LoginSrv\CountLog\
FeedIDList=C:\WolServer\LoginSrv\FeedIDList.txt
FeedIPList=C:\WolServer\LoginSrv\FeedIPList.txt
Code:
TriggerDir=
BaseDir=C:\WolServer\Mir200\Share\
IDDBDir=..\LoginSrv\IDDB\
GuildDir=C:\WolServer\Mir200\GuildBase\Guilds\
GuildFile=C:\WolServer\Mir200\GuildBase\Guildlist.txt
VentureDir=C:\WolServer\Mir200\ShareV\
ConLogDir=C:\WolServer\Mir200\ConLog\
CastleDir=C:\WolServer\Mir200\Castle\
CastleFile=.\Castle\List.txt
EnvirDir=C:\WolServer\Mir200\Envir\
sFriendsDir=.\Friends\
MapDir=C:\WolServer\Mir200\Map\
NoticeDir=C:\WolServer\Mir200\Notice\
LogDir=C:\WolServer\Mir200\Log\
PlugDir=.\
Additional Information
Setting Up Online
Following Ports need forwarding
7000
7100
7200
7300
7400
Reason for the extra ports is because we need to run 3 runagates for secure connection.
Find your IP Adress http://www.whatismyip.com
Edit the follow files
DBServer/!ServerInfo.txt
127.0.0.1 2.127.3.184 7200 2.127.3.184 7300 2.127.3.184 7400
LoginSrv/!addrtable.txt
woool Title1 127.0.0.1 2.127.3.184 2.127.3.184:7100
Mir200/!runaddr.txt
127.0.0.1
2.127.3.184
;----------------------------------------------------------------------------------------------------------------------------
CTDataView
This is a simple editing tool which allows you to edit all databases, more secure way of editing through SQL.
Setup CTDataView
Open CTDataView.iniand enter your sql details
Code:
[DATASETUP]
DataServer=
DataBase=CHERODB
DataAccount=sa
DataPassWord=
SQL Picture Guide:
Download:
Red: 32bit
Blue: 64bit
SQL 2008
Scroll down the list and download SQL Management Studio.
Installing SQL 2008 R2
Accept License Terms.
You can leave the next part default or you can give it any name you wish, it will be the name of your SQL server instance name and is used in the server files
Code:
DataServer=[COLOR=#ff0000][B]DAZZ-PC\SQLEXPRESS[/B][/COLOR]
DataBase=CHERODB
DataAccount=sa
DataPassWord=woool
Select mixed mode and enter a password.
Click Next on next screen and should start installing.
Install SQL Management Studio is pretty much exactly the same process, you should see it in the features list when you get to that point, if you don't then it's something to do with other sql installations and i can't exactly remember how to solve that problem, happend to me once but can't remember how i fixed it.
Last edited: