I need help getting online server

[Buldok]

Hello everyone, I have created a 3.55 server, I would like to know how to put it online, to test with some friends could tell me how I should set the ips to connect to people.

I go with this configuration to the server and I do well, lets me create and delete characters.

TBL_PUBIP

127.0.0.1 LoginGW
Conn DB 127.0.0.1 Set1
Set1 127.0.0.1 GameSrv1
127.0.0.1 LoginServer


Selectgateips

192.168.1.33


HL_RegServer

LOCALIP = 127.0.0.1
RegPort = 7010
SQLIP = 127.0.0.1
LoginPort = 7000
LoginSrvPort = 5500
LoginSrvIp = 192.168.1.33

! ServerInfo

127.0.0.1,192.168.1.33:7200

HolleyDBSvrEiIP

192.168.1.33


! Setup.txt

127.0.0.1 all

! runaddr

127.0.0.1

! SERVERT

0 127.0.0.1 7200
0 127.0.0.1 7200


Rungate

ServerAddr = 127.0.0.1
ServerPort = 5010
GateAddr = 0.0.0.0
GatePort = 7200

Selgate

ServerAddr = 127.0.0.1
ServerPort = 5100
GateAddr = 127.0.0.1
GatePort = 7100

LoginGate

Addr = 127.0.0.1
RemotePort = 5500
LocalPort = 7000

I use the telefonica wireless router, the Comtrend CT-5365, I think it has loopback.

Thanks in advance, greetings.

 

[CraZyEriK]

Try ping your WAN ip.. Start -> CMD -> Ping yourip (if u dont know what ip is www.cualesmiip.com) if you get answer, you have loopback.. if is not answer, you have not..

Try put ips like this http://www.lomcn.co.uk/forum/showth...Will-Ever-Need&p=552802&viewfull=1#post552802

good luck


---
Intenta hacer un ping a tu ip externa, entra la web de ahi arriba y abres cmd y usas ping tuip, si tienes respuesta tienes loopback, si no tienes, pues no tienes loopback..

usa la configuracion que posteó mapadale aqui http://www.lomcn.co.uk/forum/showth...Will-Ever-Need&p=552802&viewfull=1#post552802

Suerte

 

[Buldok]

loopback if that I have, I responded to the ping, then the configuration would be the correct ip?

si que tengo loopback, me a dado respuesta el ping, entonces la configuración correcta de ip seria esta?

TBL_PUBIPS
MIR3 127.0.0.1 localhost

TBL_SELECTGATEIPS
MIR3 7100 91.84.20.13 Sting

mud3 \ mir3server \ HolleyDBSvr \ HolleyDBSvr.exe
IP Set in here - 127.0.0.1

mud3 \ mir3server \ HolleyDBSvr \! serverinfo.txt
127.0.0.1,91.84.20.13:7200

Mud3 \ mir3server \ GameGate \ SelGate \ Config.ini
ServerAddr = 127.0.0.1
ServerPort = 5100
GateAddr = 127.0.0.1
GatePort = 7100

C: \ Mud3 \ mir3server \ GameGate \ RunGate \ Config.ini
ServerAddr = 127.0.0.1
ServerPort = 5010
GateAddr = 0.0.0.0
GatePort = 7200

C: \ Mud3 \ mir3server \ ????? \ RegServer.exe
LOCALIP = 192.168.0.25
RegPort = 7010
SQLIP = 127.0.0.1
username =**********
password =**********
Mapname = 0
Map_X = 160
Map_Y = 230
LoginPort = 7000
LoginSrvPort = 5500
LoginSrvIP = 127.0.0.1

C: \ Mud3 \ Setup \! ​​Runaddr.txt
127.0.0.1

C: \ Mud3 \ Setup \! ​​Servertable.txt
0 127.0.0.1 7200

C: \ Mud3 \ Setup \! ​​Setup.txt
IP Game - 127.0.0.1
Hero IP - 127.0.0.1
DBAddress - 127.0.0.1
MsgAddress - 127.0.0.1
IDSAddress - 127.0.0.1
LogAddress - 127.0.0.1

 

[TheDayIDie]

TBL_PUBIPS
MIR3 127.0.0.1 localhost

TBL_SELECTGATEIPS
MIR3 7100 91.84.20.13 Sting

mud3 \ mir3server \ HolleyDBSvr \ HolleyDBSvr.exe
IP Set in here - 127.0.0.1

mud3 \ mir3server \ HolleyDBSvr \! serverinfo.txt
127.0.0.1,91.84.20.13:7200

Mud3 \ mir3server \ GameGate \ SelGate \ Config.ini
ServerAddr = 127.0.0.1
ServerPort = 5100
GateAddr = 127.0.0.1
GatePort = 7100

C: \ Mud3 \ mir3server \ GameGate \ RunGate \ Config.ini
ServerAddr = 127.0.0.1
ServerPort = 5010
GateAddr = 0.0.0.0
GatePort = 7200

C: \ Mud3 \ mir3server \ ????? \ RegServer.exe
LOCALIP = 192.168.0.25
RegPort = 7010
SQLIP = 127.0.0.1
username =**********
password =**********
Mapname = 0
Map_X = 160
Map_Y = 230
LoginPort = 7000
LoginSrvPort = 5500
LoginSrvIP = 127.0.0.1

C: \ Mud3 \ Setup \! ​​Runaddr.txt
127.0.0.1

C: \ Mud3 \ Setup \! ​​Servertable.txt
0 127.0.0.1 7200

C: \ Mud3 \ Setup \! ​​Setup.txt
IP Game - 127.0.0.1
Hero IP - 127.0.0.1
DBAddress - 127.0.0.1
MsgAddress - 127.0.0.1
IDSAddress - 127.0.0.1
LogAddress - 127.0.0.1

if im right the highlighted ip's / 1server name needs to be changed?

---------- Post added at 05:46 PM ---------- Previous post was at 05:45 PM ----------

TBL_PUBIP

127.0.0.1 LoginGW
Conn DB 127.0.0.1 Set1
Set1 127.0.0.1 GameSrv1
127.0.0.1 LoginServer


Selectgateips

192.168.1.33


HL_RegServer

LOCALIP = 127.0.0.1
RegPort = 7010
SQLIP = 127.0.0.1
LoginPort = 7000
LoginSrvPort = 5500
LoginSrvIp = 192.168.1.33

! ServerInfo

127.0.0.1,192.168.1.33:7200

HolleyDBSvrEiIP

192.168.1.33


! Setup.txt

127.0.0.1 all

! runaddr

127.0.0.1

! SERVERT

0 127.0.0.1 7200
0 127.0.0.1 7200


Rungate

ServerAddr = 127.0.0.1
ServerPort = 5010
GateAddr = 0.0.0.0
GatePort = 7200

Selgate

ServerAddr = 127.0.0.1
ServerPort = 5100
GateAddr = 127.0.0.1
GatePort = 7100

LoginGate

Addr = 127.0.0.1
RemotePort = 5500
LocalPort = 7000

and again same here

 

[twisterdmk]

Make sure your server name is correct in all places, your IP config looks okay as long as you have your ports forwarded. Your internal IP is router 192.1.168.xxxx and your external needs to be set like you have it in red.

 

[Buldok]

hello, I still can not put my server online, I think this setup is good, but I get offline, I have open ports, 7000, 7100, 7200, I'm desperate to open it and test with friends, I hope your help, thank you crazy!

TBL_PUBIPS
127.0.0.1 all

TBL_SELECTGATEIPS
BlackDragon 82.31.237.60 7100 MIR3

Mud3\HolleyDBServer.exe\LoginServer

127.0.0.1

mud3\mir3server\HolleyDBSvr\HolleyDBSvrEiIP.txt
82.31.237.60

mud3\mir3server\HolleyDBSvr\!serverinfo.txt
127.0.0.1,82.31.237.60:7200

Mud3\Mir3Server\GameGate\LoginGate\Mir3Login.ini

[server]
Title='帐号登陆管理器'
addr=127.0.0.1
remoteport=5500
localport=7000

Mud3\mir3server\GameGate\SelGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5100
GateAddr=127.0.0.1
GatePort=7100

C:\Mud3\mir3server\GameGate\RunGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5010
GateAddr=0.0.0.0
GatePort=7200

C:\Mud3\mir3server\?????\RegServer.exe
LocalIP=192.168.1.33
RegPort=7010
SQLIP=127.0.0.1
Username=sa
Password=**********
MapName=0
Map_X=160
Map_Y=230
LoginPort=7000
LoginSrvPort=5500
LoginSrvIP=127.0.0.1

C:\Mud3\Setup\!runaddr.txt
127.0.0.1

C:\Mud3\Setup\!servertable.txt
0 127.0.0.1 7200
0 127.0.0.1 7200

C:\Mud3\Setup\!Setup.txt
Game IP - 127.0.0.1
Hero IP - 127.0.0.1
DBAddress - 127.0.0.1
MsgAddress - 127.0.0.1
IDSAddress - 127.0.0.1
LogAddress - 127.0.0.1

C\Mud3\CruelDragon3G.ini

[游戏设置]
服务器IP=127.0.0.1

 

[woogyeman]

all ip should be 127.0.0.1
if internal works... backup...
slowly change these ips..
TBL_SELECTGATEIPS should be your net ip
DBSRV's serverinfo.txt file should have your 127.0.0.1,net ip:7200
regserver's ip should bind on 192.168.x.x

 

[Buldok]

all ip should be 127.0.0.1
if internal works... backup...
slowly change these ips..
TBL_SELECTGATEIPS should be your net ip
DBSRV's serverinfo.txt file should have your 127.0.0.1,net ip:7200
regserver's ip should bind on 192.168.x.x

no online woogyeman:bord: you have msn woogyeman? talk on there

 

[Yolom]

browse for me in fcbk. I can help you

 

[dagras]

hello guys, im fairly new to setting up an offline server. I have searched endlessly on forums for answers i need, but most links are dead and info given doesnt work.Running 3.55 files holly3g, i have setup ODBC as instructed, loaded all the necessary files into DB.when i run Logsvr , i get messages saying TBL-PUBIPS, TBL-USERIPS, TBL-GMIP, TBL-SERVERINFO Cant find specified files, and the latest error i had is HL_3.55loader (import;DLL missing-script.DLL,error 126) and DBSVR says cant find specified file ,when i run rungate, says wrong rungate tried to run. would someone mind explaining what im doing wrong and how to fix please. and also how can i make all the gates run in english. I have the chinese(PRC) ENABLED.