whys that

[asda]

[Reg]
Key=testfsdmir2
IP=127.0.0.1 (ive tried changing this to my ip)
ServerAddr=213.40.160.123
ServerPort=60320


the ip 213.40.160.123 is ment to be a reg server up and running, heres the problem when i run the 3in1 the ip in the top does change to 213.40.160.123 it stays as 192.168.0.2 and i end up with a blank screen, Im using unplug prog.

any ideas?

 

[morrigu]

You dont need the 3in1 exe when your connecting to the reg server that has been put up. your settings are right just make sure the server address is pointing to the current reg sever thats working as the original had stopped. make sure you do the same adress in both setup.txt in mir200 folder and in the dbserver folder if you still aint sure check 1 of the setup guides.