not sure if this should be disconnected or not, but nothing ever changes with DB Server, here is a screeny of all the exes running, can someone tell me if i have done something wrong? i can get to the login screen but no server selection shows, not sure if this is something to do with that
DB Server disconnected?
- Thread starter nathan123
- Start date
nathan123 said:
You obviously aint done everything....
You dont have the HeroDB setup right dont say you do cause you dont
READ any guide on how to setup HeroDb its incredibily easy
You have setup a 1.4 server before havnt u....
Upvote
0
12) Install DBCommander 2000 Pro (if you haven't already installed it).
13) Open your control panel in Start > Settings > Control Panel.
14) Open 'BDE Administrator'. Then, click 'Object', 'New'.
15) A box will pop-up with a drop-down selection box. From that box select STANDARD, and click
OK.
16) In the left-panel you'll see a new file appear called 'standard1', rename this to HeroDB
In the right panel, it'll look like this.
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH
Change to:
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH C:\mirserver\mud2\DB
17) in the left-panel right click the HeroDB file and click 'apply'.
18) Close BDE Administrator
I even told u how 2 do it havent i ^_^ ~_~
13) Open your control panel in Start > Settings > Control Panel.
14) Open 'BDE Administrator'. Then, click 'Object', 'New'.
15) A box will pop-up with a drop-down selection box. From that box select STANDARD, and click
OK.
16) In the left-panel you'll see a new file appear called 'standard1', rename this to HeroDB
In the right panel, it'll look like this.
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH
Change to:
Type STANDARD
DEFAULT DRIVER PARADOX
ENABLE BCD FALSE
PATH C:\mirserver\mud2\DB
17) in the left-panel right click the HeroDB file and click 'apply'.
18) Close BDE Administrator
I even told u how 2 do it havent i ^_^ ~_~
Upvote
0
- Status