- Jul 20, 2004
- 5,258
- 3
- 295
How to set up the ledu client to connect to your desired server
By: Gimpasaurus
By: Gimpasaurus
Step one: You will need to download the .rar archive and place it on your desktop
Link for downloading the mirconfig and ledu exe wich you will be editing:
http://www.senture-mir.com/mirfiles/mir2/LeduLatest.rar
Link for downloading the leduipchanger:
http://www.senture-mir.com/mirfiles/mir2/LeduIPChanger.rar
Step two: Extract the contents of the archive to your desktop using WinRAR
Step three: Open the file called "LeduIPChanger.exe" (you can find it where you extracted the archive you had downloaded).
Step four:
- Open the ledu exe file, then change the IP, then change the server name, then press the save button, then press the OK button (picture provided below)
Step five: Open the file called "mirconfig.exe" (you can find it where you extracted the archive you had downloaded).
Step six:
- In the field marked with number 10, press the little square button you see in the end of the field. A new window will appear, browse to the ledu exe you had downloaded in the start and double click it when you find it.
- In the field marked with number 11, press the little square button you see in the end of the field. A new window will appear, browse to the file called "Liebao.dll" or "L-iebao.dll" in some cases, and double click it when you have found it (it can be found in the folder you extracted the downloaded archive to).
- In the field marked with number 12, type in the word "pie"
- In the field marked with number 1, type in the same IP adress you typed in the "LeduIPChanger" program.
- In the field marked with number 2, type in the same name you typed in the "LeduIPChanger"
- The field marked with number 3 can be left empty.
- The field marked with number 4 can be left empty.
- In the field marked with number 5 type in the same server name you typed in the "LeduIPChanger"
- In the field marked with 7, type in the number "7000"
- The field marked with number 8, can be left empty.
- The field marked with number 9, can be left empty.
- In the field marked with number 6 type in the number "7000"
- In the white box inside the mirconfig box, you should see the name "DevilSoul" and the number "7000". Select the line with those writings on it, and then press the button marked with number14
- After you have followed all those steps, press the button marked with number 13
- Then, press the button marked with number 16
- And finally, press the button marked with number 17, and you are done.
I really do hope this guide is easy enough, so everyone will understand, but no doubt some smartass will just ignore it and just post asking for help.
Last edited by a moderator: