[Other] IP´S configuration for server online

smoochy boys on tour

CVRDesign

Loyal Member
Loyal Member
May 22, 2014
23
0
27
There are any tutorial to configure the ip´s? The server run on LAN, but when I put the IP´s public´s don´t work :S
 

idaBigA

Holley Mir 3!!
VIP
Oct 28, 2003
1,966
110
310
Stoke, UK
Try searching...

For Future Reference for all

SQL

TBL_PUBIPS
127.0.0.1 localhost MIR3

TBL_SELECTGATEIPS
Sting 91.84.20.13 7100 MIR3

mud3\mir3server\HolleyDBSvr\HolleyDBSvr.exe
IP Set in here - 127.0.0.1

mud3\mir3server\HolleyDBSvr\!serverinfo.txt
127.0.0.1,91.84.20.13:7200

Mud3\mir3server\GameGate\SelGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5100
GateAddr=127.0.0.1
GatePort=7100

C:\Mud3\mir3server\GameGate\RunGate\Config.ini
ServerAddr=127.0.0.1
ServerPort=5010
GateAddr=0.0.0.0
GatePort=7200

C:\Mud3\mir3server\?????\RegServer.exe
LocalIP=192.168.0.25
RegPort=7010
SQLIP=127.0.0.1
Username=**********
Password=**********
MapName=0
Map_X=160
Map_Y=230
LoginPort=7000
LoginSrvPort=5500
LoginSrvIP=127.0.0.1

C:\Mud3\Setup\!runaddr.txt
127.0.0.1

C:\Mud3\Setup\!servertable.txt
0 127.0.0.1 7200

C:\Mud3\Setup\!Setup.txt
Game IP - 127.0.0.1
Hero IP - 127.0.0.1
DBAddress - 127.0.0.1
MsgAddress - 127.0.0.1
IDSAddress - 127.0.0.1
LogAddress - 127.0.0.1

I think that is everywhere where I could find an IP that someone might have changed...

That is from Sting.. and it works
__________________

Can someone Sticky this so hopefully, no-one need ask the question again.
 
Upvote 0

chimera

LOMCN VIP
VIP
Jul 30, 2003
1,054
23
235
UK
Will post mine when home but mine is when through router and 127.0.0.1 will not work.

---------- Post Merged at 10:06 AM ---------- Previous Post was at 12:09 AM ----------

Like I say mine is a bit different.
I use a router with address 192.168.1.1
I cannot use 127.0.0.1 because of the router so I had to set up a replacement localhost IP address of 192.168.1 51
You can research this, it's a common problem. So my IP setups are thus:

SQL

TBL_PUBIPS
192.168.1.51
192.168.1.51
192.168.1.51
NETIP


TBL_SELECTGATEIPS
HOME NETIP 7100 MIR3

mud3\mir3server\HolleyDBSvr\HolleyDBSvr.exe
IP Set in here - 192.168.1.51

mud3\mir3server\HolleyDBSvr\!serverinfo.txt
192.168.1.51, NETIP:7200

Mud3\mir3server\GameGate\SelGate\Config.ini
ServerAddr=192.168.1.51
ServerPort=5100
GateAddr=192.168.1.51
GatePort=7100

C:\Mud3\mir3server\GameGate\RunGate\Config.ini
ServerAddr=192.168.1.51
ServerPort=5010
GateAddr=0.0.0.0
GatePort=7200

C:\Mud3\mir3server\?????\RegServer.exe
LocalIP=NETIP
RegPort=7010
SQLIP=192.168.1.51
Username=**********
Password=**********
MapName=0
Map_X=160
Map_Y=230
LoginPort=7000
LoginSrvPort=5500
LoginSrvIP=192.168.1.51

C:\Mud3\Setup\!runaddr.txt
192.168.1.51

C:\Mud3\Setup\!servertable.txt
0 192.168.1.51 7200

C:\Mud3\Setup\!Setup.ttxt
Game IP - 192.1681.51
DBAddress - 192.168.1.51
MsgAddress -192.168.1.51
IDSAddress - 192.168.1.51
LogAddress -192.168.1.51
 
Last edited:
Upvote 0

Deleted member 16005

Guest
Will post mine when home but mine is when through router and 127.0.0.1 will not work.

---------- Post Merged at 10:06 AM ---------- Previous Post was at 12:09 AM ----------

Like I say mine is a bit different.
I use a router with address 192.168.1.1
I cannot use 127.0.0.1 because of the router so I had to set up a replacement localhost IP address of 192.168.1 51
You can research this, it's a common problem. So my IP setups are thus:

SQL

TBL_PUBIPS
192.168.1.51
192.168.1.51
192.168.1.51
NETIP


TBL_SELECTGATEIPS
HOME NETIP 7100 MIR3

mud3\mir3server\HolleyDBSvr\HolleyDBSvr.exe
IP Set in here - 192.168.1.51

mud3\mir3server\HolleyDBSvr\!serverinfo.txt
192.168.1.51, NETIP:7200

Mud3\mir3server\GameGate\SelGate\Config.ini
ServerAddr=192.168.1.51
ServerPort=5100
GateAddr=192.168.1.51
GatePort=7100

C:\Mud3\mir3server\GameGate\RunGate\Config.ini
ServerAddr=192.168.1.51
ServerPort=5010
GateAddr=0.0.0.0
GatePort=7200

C:\Mud3\mir3server\?????\RegServer.exe
LocalIP=NETIP
RegPort=7010
SQLIP=192.168.1.51
Username=**********
Password=**********
MapName=0
Map_X=160
Map_Y=230
LoginPort=7000
LoginSrvPort=5500
LoginSrvIP=192.168.1.51

C:\Mud3\Setup\!runaddr.txt
192.168.1.51

C:\Mud3\Setup\!servertable.txt
0 192.168.1.51 7200

C:\Mud3\Setup\!Setup.ttxt
Game IP - 192.1681.51
DBAddress - 192.168.1.51
MsgAddress -192.168.1.51
IDSAddress - 192.168.1.51
LogAddress -192.168.1.51


I've followed this, it all works apart from when i try and connect the regserver keeps kicking me at the char screen, It wont accept my NETIP, it allows my local ip.

I've forwarded all the ports, do you have skype?

I've got a EE-Brightbox
 
Upvote 0

chimera

LOMCN VIP
VIP
Jul 30, 2003
1,054
23
235
UK
Port 192.168.1.51 is localip but the server has a different 192.168.1.xx and that is the one I use to forward in the router, have you done the same?
 
Upvote 0

Deleted member 16005

Guest
I'll have a go tonight, i still cant get on mine :(

---------- Post Merged at 09:54 PM ---------- Previous Post was at 09:08 PM ----------

Just a bit of further info How to set up Microsoft Loopback adaptor. For those who cannot connect to their own server :)

Wonders if I will get rep points for this :pride::RpS_blushing:

I've installed this onto my laptop, but i still cant get on, abit confused.
 
Upvote 0