Ruby MapInfo.txt

[NoOne]

I was download and install all stuff from this link:
http://www.lomcn.co.uk/forum/showthread.php?72246-Ruby-Server-Setup-Guide-Video
and almost all work fine, excluding gates from map to map.
I was add my MapInfo.txt in attachement. There is not add gates cords. This file have only a couple of maps. Of course i can add it for all maps manually but it be a lot of work...
Question:
It is possible to find a good MapInfo file ? (with cords from map to map) And if YES please tell me where

THX A LOT

 

[Diego]

There are a few sources that provide pretty comprehensive Mapinfo txts, but none totally match Ruby. In my opinion, the best are off the lemon files. It will give u NPC errors, but the server will run and the vast majority of gates will work correctly. Be advised, alot of the NPC's have been removed, on Ruby, probably because of all the quest errors they were causing. So regardless, if u want it error free, u need to paste in sections from lemon gradually and resolve the few errors there are, and then add ur npcs back gradually.
Give me a sec and i'll add a megaupload link for the mapinfo i got and u'll be wanting MiniMap info too lmao



http://www.megaupload.com/?d=RO3H96SB

http://www.megaupload.com/?d=9TC1MS00

---------- Post added at 11:38 AM ---------- Previous post was at 11:23 AM ----------

Actually there are quite a few omissions and bugs, I found these in a very short space of time (so there must be alot more):
Large poison image wrong
No facility to make poison
Mount items with no dura or variation
No NPCs in tonnes of locations
Disabled official quests
No harvest items
No method of reviving hero because alot of special items dont work and npc isnt there
Incorrect labelling of items between drop files and STDitem db
Apparently some set bonuses dont work

The vast majority of this is easily resolvable atleast, not like u need C++ to solve these
Not being mean, i'm helping by telling u what u need to look at

 

[NoOne]

Thanks man, I will test it but first link seems to be incorrect or maybe its only megaupload probems. I got info:
The file you are trying to access is temporarily unavailable. Please try again later.

 

[Diego]

I will check links
I think MU just being a pain, it does that. It's telling me i've too much activity on my IP
Try it a couple of times for me, if not, I might be able to send u on msn or somin

RUBY files are pretty decent in all fairness
One other crucial file u'll want is this:

http://www.megaupload.com/?d=GAQ9A9JF

Then Put this line into Merchant.txt. Might as well stick it under ur BW NPCs
HMan 0 337 272 LegendaryHero 4 31 0 0

This will allow you to properly manage you Hero pets. The core File is
ALL CREDIT TO ADMINISTRATOR "RENO"
I have cleaned it up slightly and matched it to the typical ruby config
I also removed the item herorelive, cos noone has it working on RUBY.

 

[NoOne]

Hmm, i have some problem and don't have idea how to solve it.
I was put mapinfo and minimap from You and start server. After few second:



so.... go to MapInfo, line 3084:

[D10071 RedMoonRoom	0]  DARK NORECALL NODEARRECALL NOPOSITIONMOVE NORECONNECT(D10031)

and dont know what is wrong. I have D10071.map in map folder. Was exclude that line by add ' ; ' in front. After it have the same error but in line 3083:

[D10054	RedValley_5thF	0]  DARK CHECKQUEST(Q1GreyApeRoom) NEEDSET_ON(411) NORECALL NODEARRECALL NOPOSITIONMOVE NORECONNECT(D10032)

When i put back my mapinfo and minimap files server start up normally

 

[Diego]

Remove anything related to the quests. Checkquest and the bits next to that in brackets need to go

---------- Post added 29-11-2011 at 10:16 PM ---------- Previous post was 28-11-2011 at 11:16 PM ----------

Like I said, paste in sections gradually. Ruby files u've got have only 3 zones and the buildings those zones covered i think, and no gates between those zones. Make a start with each zone. Like on map 0 (bichon) u've got 3 dungeons. Oma cave x 2 and dead mine. Add those then the minimaps for those. Then Do ur 3 gates on 0, like to Snake valley.
This way u can keep an eye on what errors ur getting and u won't forget to do all ur minimaps and mapquests_defs.

 

[NoOne]

I'm a stupid or just dont know something important.
Like You say i was start to make new mapinfo file. Paste into it few by few lines from You file. When was paste line #3095 and start serwer then got the same error like on screen in last post :'( When i delete that #3095 line then no errors have.. I was try to delete all quest from MapQuest_def dir and Qxx from mapinfo, this did not help

Here my map file
View attachment MyMapInfo.txt

I lost my hope to run this server o.o

 

[Diego]

My mapquest_def was empty anyhow. It will fail if any map specified is not there. I have a feeling its ur maze co-ords that are letting u down. The ZT maze is notoiously hard to resolve. Mine is very limited locations atm, so no point me giving u. Someone is bound to post one soon. I'll run ur mapinfo over the next few days and give u the verdict.

---------- Post added 05-12-2011 at 08:01 PM ---------- Previous post was 01-12-2011 at 10:47 PM ----------

Right I had a look at it, and made you this mapinfo. It's not perfect, if i ever finish mine i'll post it, for the time being use this:

http://www.megaupload.com/?d=Q83NZ4XV

It's basically the lemon content with the guild territories added and a tiny amount removed, but by the looks of it, the bits i've removed were not proper zones anyway, they were specialised non-official quest maps available by teleport only. So hopefully this will serve you ok

Report back, and enjoy!

 

[Robert]

Just download the test files that Iceman posted in the RubyM2 releases folder.

These will run 100% and will allow you to have a base to begin customising.

 

[Diego]

He doesn't want the base, he wanted a full mapinfo. So i put a decent enough one together for him

 

[NoOne]

So hopefully this will serve you ok

Yes, this one work without errors and have good gate cords, THX A LOT. Maybe You have some good MiniMap.txt file? My have only 7 lines long

And anorher thing. On every map i have some korean/chinesee signs. Its is normal? Can i change it? If YES tell me where

 

[Diego]

Right I have both ur solutions my friend!
First off, go to ruby release section and download BIGMAP update and follow the instructions. All credit to Andeh

Secondly, I will dig u out the right minimap.txt

http://www.megaupload.com/?d=5JRC5AK0

Don't forget, you'll have mobs and maps that don't ever get used unless u dig them out. Reason being, alot of NPC's and stuff taken out. Like the bonepile that gives u access to a cool mine full of ghouls with crazy drop files. Try tele'in to to Map D4221, i don't think u can get in or out any other way, that's just one example. There's lots of content for u to add back into game using quests and NPCs.