Router hlp

[GateCrasher]

Got bit of problem here look @ 2. and ma pic i dont get it i can do every thing else excpt tht

Ok, My server runs through a router and yes it is possible.

1. U need to set-up a DMZ in your router, you do this by going into the router- type 192.168.1.1 in Internet explorer adress bar. Not sure wher its located (depends on make of router) and set the DMZ to 192.168.1.50

2. Go to network connections on your computer, open it, select TCP/IP and click properties, from here you need to setup an static IP address, this is done by clicking th "Specify and IP" check button i cannot find it look @ ma pic

3 Put in 192.168.1.50 as the static IP subnet mask will fill itself in. Then u need to go into your router again (see step one) and find all the DNS server info, this also needs to be entered. You do this by clicking the "advanced" button at the bottom of the IP information window where you just specifyed the IP. Click the DNS tab at the top and enter ALL the DNS Information.

4. The nesxt thing to do is to start the server up, using the server launcher programs enter 192.168.1.50 as the IP (this puts the correct IP in all files) and leave the 4 u need to change ready for editing.

5. Now you need to change these four files

5.1 In DBsrv200
Addrtable!
192.168.1.50 xx.xx.xx.xx <---- your NET IP

5.2
Serverinfo!
192.168.1.50 xx.xx.xx.xx 7200 (replace xxx with net IP)

6. Next go into Logsrv
Addrtable!;Server Title Remote Public Gates...
Oblivion Line1-7 192.168.1.50 192.168.1.50 xx.xx.xx.xx:7100 (replace xxx with net IP)

6.2
ServerAddr!
xx.xx.xx.xx <--- Net IP
192.168.1.50
192.168.1.50
192.168.1.50



This is as clear as i can make it and i hope it gets your server online, i KNOW this way works because i am running Oblivion server on this exact setup as we speak :P

Any other problems or if u need anyhting explainign PM me or post on here as im not on MSN often

---- Some credit for this Guide must go to Iamdeath who is responsible for me managing this task myself in the first place-----

 

[Dark12345]

erm hi m8 wen ur atually finsied with router add me 2 msn [email protected] and explain how 2 do cus i made server (but i only young and dont kno how do router)

 

[Atomicide]

Worded differently on ur version of windows ... its "use the following IP address" button. Thats ur solution :P

 

[GameHeaven]

Hi Can u help me please wid me Roater thanx

 

[iamdeath]

put 192.168.1.50 in IP adders, in subnet mark is 255.255.255.0, if your router is 192.168.1.1 put that in defualt gatway or the ip for the router some are 192.168.0.1 or 2 in dms bit use the dms from the router setup page just the top 2 you get 3 but you only need the first 2

ps i use zonealarm as the firewall works fine with mir2 or mir3 servers and its free