Server Test

[stinger357]

Can someone please try and connect to my LOM 3 server and see if I got my router hooked up right to allow outside connections. The IP is 24.1.63.167 use Pass: nit4fun21 Pass: ******

Let me know if you can get in ok. If not I need to figure this out....I want to open my server up to the public.

Thanks

 

[stinger357]

Try username test1 pass test1

Sorry

Again sorry use tester1 tester1

Username: tester1
Pass: tester1

Thanks,

 

[LeoCrasher]

Could not connect to your server, 'connection was refused'.

/Leo

 

[stinger357]

I know it has something to do with my Loginsrvr. It says this at the top:
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1
Invalid address connection tried.. [MasSoc] 192.168.1.1

here is what I have in ServerAddr:

24.1.63.167
192.168.1.100
192.168.1.100
192.168.1.100


this is what I have in addrestble:

;No space allowed
;Server Title Remote Public Gates...
ktest Line1-7 192.168.1.100 192.168.1.100 192.168.1.100:7100 24.1.63.167:7100


Any clue Leo as to why it wont work outside of the router...My router is set to a DMZ...all ports open...I can connect through LAN perfectly.

Thanks,

I might need to move this to the server help sorry.

 

[stinger357]

ok

OK I ran it with all 192.168.1.100 then went into the loginsrvr and made the public 24.1.63.167 and the gate to 24.1.63.167:7100 and it says well started now. can you try it again.


Thanks,

 

[Rampage]

still dont work m8 "target machien activly refused the connection"

 

[LeoCrasher]

Same error when connecting with ServerCount (port 3000): "Error: Connection is forcefully rejected"

However my MIR2 client was able to connect to you fine - (which means EI users should be able to aswell).

However try forward Port 3000 to the Server (192.168.1.100) to enable user counting.

/Leo

 

[stinger357]

OK got port 7000 opened to 192.168.1.100 and port 3000 to 192.168.1.100

I went through the router setup guide from another fourm but I got that error on the loginsrvr but all I did now was launch it with 192.168.1.100 and then change the gate and public in loginsrvr to 24.1.63.167 and opened up the ports now...I have no Firewall on now (Shutters) try it again please I appreciate you helping me on this....All my friends dont want to take the time to download the 1 gig client!!! HA

Ok give it a try now.

 

[LeoCrasher]

ktest -- Players: 0 -- Status: Good
Type: Mir3 Server

Seems to be working well

/Leo

 

[stinger357]

Cool thanks leo for all the help...but 1 question can you log in ? I see that it shows good but can you login in I wonder....some people say they get to ktest selection and click it and nothing happens....can you try that for me?

Thanks,

 

[LeoCrasher]

Well I managed to login and make a character using my Mir2 client (dont have Mir3). Once I pressed 'Start' the screen remained. Weather this is because of my client being Mir2, or a bad IP setup on the server is beyond me without M3 installed.

/Leo

 

[stinger357]

Well I think we are ok then...If someone has a Mir 3 client can you please try to make a character and connect to the server then I will know for sure if it works. Everything looks right now. With Leo's help I got the router part figured out. But now I need to know if the gameserver will alllow a connection with a mir 3 client.

Please let me know I will create another account called:

tester2
tester2

thanks,

I hope to have a public server up soon!!!!

 

[Rampage]

refused my connection again :'(

 

[stinger357]

Ok I have opened up ports 7000-8000 hoping to catch the one that is blocking it...I thought that setting the router to DMZ would open all ports but I guess not. Any other ports I might need to open? I have everything setup the way the instructions say to ...it works great on LAN. I even set my client to the 24.1.63.167 and it connected ok. HMMMM any suggestions?

 

[stinger357]

Leocrasher was able to get in with his mir2 client and create a character. That is strange? When does it give you the connection refused error? If he can get in to create a character then someone is getting in.

 

[melli]

where can i get that "server count" proggy?

melli.

 

[stinger357]

From Leo Crasher's site:

Leo's

He has a ton of cool utilities I use all the time! Check them out!

 

[melli]

thanks

melli.

 

[LeoCrasher]

From Leo Crasher's site:

Leo's

He has a ton of cool utilities I use all the time! Check them out!

He? lol... typical.

/Leo

 

[melli]

i assume by that "he?" that you are female?

melli.


p.s. just to clear it up, i'm male (29) i know most people see the nick melli and think female (don't know why but there you go lol)

melli.