SelGate errors?

smoochy boys on tour
Exsodius

Exsodius

Dedicated Member
Dedicated Member
Mar 24, 2010
593
36
115
I apologise in advance if I've not given enough information:

The problem:



I can't click on the server.

Gates:



Ei_20061128 Information log:

ready to load ini file..
TestServer :TRUE
FreeMode :FALSE
!setup.txt loaded..
SERVERTABLE :0/127.0.0.1/7201
SERVERTABLE :1/127.0.0.1/7202
loading string resource...
String resource loaded.
StdItem.DB loaded.
loading MiniMap.txt...
MiniMap information loaded.
loading MapFiles...
0:57:24:Read Emergency Map : [0] 458,398
0:57:25:Connected to common database.
0:57:25:Connected to SqlDB database.
0:57:25:SQL -> StdItems Database Start Loading :Count=1389 ...
0:57:27:SQL -> StdItems Database Load Succeed...
Mapfile loaded.
loading DropRareItems.DB...
DropRareItems.DB loaded.
loading Monster.DB...
Monster.DB loaded.
loading Magic.DB...
Magic.DB loaded.
loading MonAIs.txt...
MonAIs.txt loaded.
loading MonGen.txt...
MonGen.txt loaded.
loading MapQuest.txt...
MapQuest information loaded.
loading QuestDiary\*.txt...
QuestDiary information loaded.
envir\LineNotice.txt loaded..
AdminList loaded..
GuildList loaded..
IDSoc Initialized..
GrobalEnvir loaded..
MakeStoneMines...
merchant loaded...
StartPoints loaded..
CastleManager initilaize..
F-Engine resumed..
SQL-Engine resumed..
0:57:29:SQL -> Monster Database Start Loading :Count=396 ...
0:57:29:SQL -> Monster Database Load Succeed...
0:57:29:SQL -> Magic Database Start Loading :Count=93 ...
0:57:29:SQL -> Magic Database Load Succeed...
0:57:29:Guild list has loaded 0
0:57:29:Loginserver connected.127.0.0.1
U-Engine initialized..
0:57:49: [0] -> 2010-8-8 0:57:49
0:57:49:[@For3g061128.dll(0x005D0000)->(0x0062952D : 0x0005952D)Exception Exception]:Unable to write to C:Mud3\Envir\ParamControl\EIÄÚ²¿²ÎÊý.ini
0:57:49:Addr = 57A8AC | Module = "Ei_20061128.exe" | Unit = MudUtil.pas | Class = | Proc/Method = CallStackToStringList | Line = 113
Addr = 582372 | Module = "Ei_20061128.exe" | Unit = svMain2.pas | Class = TFrmMain | Proc/Method = StartTimerTimer | Line = 1608
Addr = 58232E | Module = "Ei_20061128.exe" | Unit = svMain2.pas | Class = TFrmMain | Proc/Method = StartTimerTimer | Line = 1597
Addr = 5853FB | Module = "Ei_20061128.exe" | Unit = !!0920-encode-Han(¿ÀÇÂÅ×¼·-½Å¼·-¾ÏÈ£È*»ª.pas | Class = | Proc/Method = _Server_JOB_ItemGen | Line = 74

0:57:49:starttimer exception...
0:58:06:Gate 0 Opened..
0:58:10:Gate 1 Opened..
0:59:46:BoApplyEventOption = TRUE
0:59:46:ExtraExpRate = 16
0:59:46:ExtraMoneyRate = 4
0:59:46:ExtraItemRate = 4
0:59:46:ExtraMonGenRate = 8
0:59:46:TrialLevel = 0
0:59:46:BoTestServer = TRUE
0:59:46:BoServiceMode = FALSE
1:01:08:Gate 0 Closed..
1:01:11:Gate 0 Opened..
1:01:12:Gate 1 Closed..
1:01:15:Gate 1 Opened..
1:01:16:Gate 0 Closed..
1:01:16:Gate 0 Opened..
1:01:20:Gate 1 Closed..
1:01:20:Gate 1 Opened.

My Ips are as follows:



I am pretty sure my router does not support loopback but I read in another thread that as it's internal that shouldn't be the problem for me to get on the server. I have forwarded the following ports on my router: 5100, 5010, 4900, 5500, 5600, 3000, 7100, 7000, 7200, 6000, 7201, 7202.

I used twisterdmk's server guide. All advice is appreciated.
 
Last edited:
Sort by date Sort by votes
twisterdmk

twisterdmk

LOMCN Veteran
Veteran
May 13, 2009
759
28
115
USA
Have you tried loggin in on 127.0.0.1 IP?
Try looking in your C:/Mud3/Setup/Setup.txt editor, under the Mud3 Dir try putting .\Log\
Under your Map path, make Map instead of map. Also try putting your External IP and Internal IP as the same and use local for SQL.

Be sure and check your C:/Mud3/Mir3Server/KloginSvr/!AddrTable.txt and make sure it looks something like this

And I also noticed that your password is 8 on the IP Tool and
;;服务器名 网关标识 (LoginGate)内部IP (LoginGate)外部IP (SelGate)外部IP:端口(一多记录10个SelGate)
Test Test 127.0.0.1 127.0.0.1 127.0.0.1:7100
;;WWW.K3SOFT.COM

Also tick the 外部IP:端口 part on the KLoginSvr gate.
Apart from all your screens, all gates seem to be working properly. Try doing these steps and see if it resolves your problems.
 
Upvote 0
Exsodius

Exsodius

Dedicated Member
Dedicated Member
Mar 24, 2010
593
36
115
I did all the changes you suggested and have got past character select so thank you for that however now it hangs on the "connection to server" message. I did add you on msn yesterday but I can fully understand you're probably bored of helping people with little knowledge :)
 
Last edited:
Upvote 0
twisterdmk

twisterdmk

LOMCN Veteran
Veteran
May 13, 2009
759
28
115
USA
You can add my msn if you need Ascension, however, did you try changing the IP to 127.0.0.1 for all of them and trying to log in. If your getting past the CharSelGate screen, i'm 80% sure it is your router.
 
Upvote 0
Exsodius

Exsodius

Dedicated Member
Dedicated Member
Mar 24, 2010
593
36
115
Yeah I'm still hanging on the connecting to server message with all IPs set at 127.0.0.1. If you have the time, I have added you on msn /Rich. Thank you.
 
Last edited:
Upvote 0
twisterdmk

twisterdmk

LOMCN Veteran
Veteran
May 13, 2009
759
28
115
USA
0:57:49:[@For3g061128.dll(0x005D0000)->(0x0062952D : 0x0005952D)Exception Exception]:Unable to write to C:Mud3\Envir\ParamControl\EIÄÚ²¿²ÎÊý.ini
0:57:49:Addr = 57A8AC | Module = "Ei_20061128.exe" | Unit = MudUtil.pas | Class = | Proc/Method = CallStackToStringList | Line = 113
Addr = 582372 | Module = "Ei_20061128.exe" | Unit = svMain2.pas | Class = TFrmMain | Proc/Method = StartTimerTimer | Line = 1608
Addr = 58232E | Module = "Ei_20061128.exe" | Unit = svMain2.pas | Class = TFrmMain | Proc/Method = StartTimerTimer | Line = 1597
Addr = 5853FB | Module = "Ei_20061128.exe" | Unit = !!0920-encode-Han(¿ÀÇÂÅ×¼·-½Å¼·-¾ÏÈ£È*»ª.pas | Class = | Proc/Method = _Server_JOB_ItemGen | Line = 74

Try running the TrialReset and ArmaFP once more,(theirs a video on this in the Mud3 folder if your not aware) it may be a hardware fingerprint issue.
 
Upvote 0
Serane

Serane

Dedicated Member
Dedicated Member
Feb 18, 2012
246
5
45
some of that windows has Server name : RICHCOMP ....... and other has Exodus try put same names
 
Upvote 0
You must log in or register to reply here.
Top Bottom