This final section applies the final changes needed to make everythng effective. Load up your DB server, you will see 3 buttons at the bottom click on the far right one you will then get a screen looking somthing like this
you will need to set the ip how it is set in your server files in the highlighted area below
click apply and close then close your db server.
next load up your login server and double click in the white area at the top, you should get a screen like this
copy the text highlighted into the box below and change the ip to how it is set in your server files (be careful, it should looklike " serverip:7100") and check the box next to it save then close that.
Now your server should be set up correctly to be accessed over the internet and LAN if you have a friend that nice enough to test it over the internet go ahead and trial it over the LAN at the same time, if you have any problems i will try my best to help you out.