Dbc

[Ingeronic]

after i click finish on the dbc installer it just says that 1 of my system files is not suitable for running msdos and microsoft windows applications

 

[|5pl4t|]

Search for AUTOEXEC.NT on Google and download it.

Extact it to C:\windows\system32

I stand to be corrected if thats the wrong path :P

 

[Ragnar]

Search for AUTOEXEC.NT on Google and download it.

Extact it to C:\windows\system32

I stand to be corrected if thats the wrong path :P

Dont think this is the case..


Did you download the installation from fernys? If so, that one is corrupt. Get one frm the official site, then either get a serial number for it or a crack (www.dbcommander.com)

 

[JealY]

its hard 2 get a crack for the latest build, ide suggest finding a older version, ive got 5.odd and i got a crack... couldnt find one for 6.+, try google

 

[Ingeronic]

Search for AUTOEXEC.NT on Google and download it.

Extact it to C:\windows\system32

I stand to be corrected if thats the wrong path :P

cant find a place to d/l it .


also i got the one from the proper website :P

 

[Babyhack]

there are 3 posts with the answer to this on the first page alone

1. Click Start, click Run, type c:\windows\repair, and then click OK.
2. Right-click autoexec.nt, and then click Copy.
3. Click Start, click Run, type c:\windows\system32, and then click OK.
4. Right-click anywhere in that folder, and then click Paste.
5. Right-click the Autoexect.nt file that you just copied, and then click Properties.
6. Click to select Read-Only, and then click OK.
7. Repeat steps 1 through 6 to copy the Config.nt file.
Note You must enable Read-Only permissions or the files will be removed after you restart Windows.

BH

 

[Ingeronic]

there are 3 posts with the answer to this on the first page alone

1. Click Start, click Run, type c:\windows\repair, and then click OK.
2. Right-click autoexec.nt, and then click Copy.
3. Click Start, click Run, type c:\windows\system32, and then click OK.
4. Right-click anywhere in that folder, and then click Paste.
5. Right-click the Autoexect.nt file that you just copied, and then click Properties.
6. Click to select Read-Only, and then click OK.
7. Repeat steps 1 through 6 to copy the Config.nt file.
Note You must enable Read-Only permissions or the files will be removed after you restart Windows.

BH

did it but the config file was already there, and isnt set to read only tho...

i also get this message now..

 

[spence]

u got a corrupt version of it lol

 

[Ragnar]

u got a corrupt version of it lol

Niceone on bumping a 2 month old thread.....:clap: